J1CK6136i Economical Horizontal CNC Lathe
View:
The CK6136i CNC lathe is based on the MAZAK-MATE360 precision horizontal lathe produced by our company in cooperation with Japan's Yamazaki Corporation (MAZAK). It has accumulated many years of experience in the production of CNC machine tools and has been developed through the secondary development of CNC. A low-cost CNC lathe with advanced performance, reliable quality, wide adaptability and high cost performance. The machine tool adopts an integral bed base, fully enclosed protection, and imported spindle bearings. Compared with similar products, it has outstanding features such as high rigidity, high precision, good accuracy and good dimensional consistency of processed workpieces.
J1CK6136i Economical Horizontal CNC Lathe Main Specifications Table (Standard Configuration)
|
项目Item |
J1CK6136i |
|
|
A手动两档 Manual 2-step |
B单轴全无级Gearless |
|
|
床身上******回转直径(mm)Max swing over bed |
φ360 |
|
|
滑板上******回转直径(mm)Max swing over cross slide |
φ160 |
|
|
******车削直径(mm)Max turning diameter |
φ360 |
|
|
主轴最高转速(r/min)Max spindle speed |
低档L:35-400 高档H:215-2500 |
150-3000 |
|
主轴头/主轴通孔直径(mm)Spindle nose/spindle bore |
A2-5 /φ40 |
A2-5 /φ52 |
|
卡盘规格(吋inch)Chuck size |
6（手动三爪Manual 3-jaw chuck） |
|
|
主轴电机功率(kW)Spindle motor power |
4.0 |
5.5 |
|
X/Z轴******行程(mm)X/Z axis travel |
X:210/Z:470,970 |
|
|
X/Z轴快速移动速度(m/min)Rapid traverse rate of X/Z axis |
6/8 |
|
|
刀架形式/车刀规格Turret type/size of tool |
电动四方electric square turret/20x20 |
|
|
数控系统CNC system |
GSK980TD |
|
